Outsunny 840-239V00 Manual Del Usuario página 6

Preparing Your Work Space
1. Before you begin, it is best to lay out all necessary tools to make setup smoother.
Refer to the required tools section for the list of necessary tools.
WARNING
DO NOT remove the safety wrap that holds the awning arms down. Serious injury
can result from removing the wrap too soon.
2. Open the awning box and unwrap each piece carefully to avoid damaging the
product.
3. Lay out each piece of the awning to ensure that all pieces are present. Refer to
the parts diagram for detailed information regarding parts.
4. Open the small, inner box that contains the small parts and lay them out as well.
5. It is recommended that at least 2 people install.
STEP 1 Connecting Roller tubes
1.Gather the two long silver tubes(B1&B2)and lay them in a line
2.Insert the roller tube(B2)into the interior end of the roller tube(B1) if insertion is
difficult, use a mallet to tap it gently in to place.
3.Once inserted, fix it into place with screws(L).
5