Descargar Imprimir esta página

Outsunny 840-239V00 Manual Del Usuario página 20

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 41
How to adjust the awning inclination
The inclination of the awning is set by adjusting the screw
WARNING
when adjusting the awning inclination, please expand the awning completely
hold up arm
Step1: Hold up the arm and loosen the screw ( 1&2)
Don't loosen the screw directly without holding the arm up.
Step2: Keep holding up the arm(C1 )by your hand and
adjust the screw(3)
If you turn the screw in the direction of arrow a, the angle of
the awning will go down.
If you turn the screw in the direction of arrow b, the angle of
the awning will rise upward.
After adjusting the screw3, please check if the awning has
been adjusted to the proper angle, if not, please repeat the
above installation steps 2
When we fully unfold the awning, we may
find that the left and right sides of the
awning are unbalanced. At this time, we
need to adjust the inclination of the awning
so that the left and right sides of the
awning can be on the same horizontal line.
Tips:You can adjust only the left side or
only the right side, you can also adjust
both left side and right side. The
inclination of the awning is up to you, but
please remember the left side and right
side should be on the same horizontal line
finally.
19

Publicidad

loading

Este manual también es adecuado para:

840-239v01