Publicidad
Idiomas disponibles
Idiomas disponibles
SET UP & USE
DRAINING THE COLLECTED WATER
Option 1: Drain Tank
When the drainage tank is full, the tank full indicator light will turn on, the operation
will stop automatically and the buzzer will sound to alert the user, that the water
needs to be emptied from the drainage tank.
Emptying the Drainage Tank
1. Lightly press on the sides of the tank with both hands and pull the tank out gently.
2. Discard the collected water.
NOTE：
1. Do not remove the float from the water tank. The water full sensor will no longer be
able to detect the water level correctly without the float and water may leak from
the water tank.
2. If the drainage tank is dirty, wash it with cold or lukewarm water. Do not use
detergent, scouring pads, chemically treated dust cloths, gasoline, benzene, thinner,
or other solvents, as these can scratch and damage the tank and cause water
leakage.
Page 12
Publicidad
