Publicidad
Idiomas disponibles
Idiomas disponibles
SET UP & USE
NOTE: The pump operation light blinks every second when the pump is failing to
operate. Please turn off the unit and plug the power cord out. Check the
following things:
• Cleaning the filter of the pump. Remove the bucket from the unit, take down the
pump and clean the filter of the pump.
• Empty the water of the bucket.
• Reinstall the pump hose if it drops and reinstall the bucket properly. Turn on the
unit.
NOTE: Do not use this operation when the temperature is equal to or less than 32˚F
(0˚C), otherwise the water will freeze and will cause the water hose to be
blocked and the unit will fail to operate. Make sure to empty the bucket once a
week when using the pump draining feature. When the pump draining feature
is not being used, remove the pump drain hose from the outlet.
• Press the pump drain hose outlet in and take the pump drain hose out from it. Make
sure to not let the water in the pump hose drip to the floor.
Page 15
Publicidad
