Publicidad
Idiomas disponibles
Idiomas disponibles
CGS3
Access
8.21 Remove drain connection R1 and ensure that it does not hamper with the handling of the fan shroud L1.
8.22 Unscrew the fixing screws D of the fan shroud L1 to the internal drip tray L3; unscrew the fixing screws C from inner side
panels L2, remove baffle L4 and bring fan shroud L1 to the position shown in the figure.
8.23 Loosen the self-threading screws A, without removing them completely.
8.24 Unscrew self-threading screws B, then remove side panel L6.
Reassembling
8.25 Reposition side panel L6 and fasten it with screws A and B.
8.26 Take fan shroud L1 to its original position ensuring that the side panels L6 are inside and fasten it with screws C.
8.27 Reposition baffle L4 and fasten screws D to the inner drip tray L3.
8.28 Reassemble the drain connection R1.
L1
=
Fan shroud
L2
=
Inner side panel
L3
=
Inner drip tray
L4
=
Baffle
L5
=
Supports
L6
=
Side panel
R1
=
Drain connection
SD
=
Junction box (fans and heaters)
=
Ground pole
Figure 8
41
www.modine.com
Publicidad
