Publicidad
Idiomas disponibles
Idiomas disponibles
INFORMATION _____________________
3
Remove the blade blocks
cleaning by pulling them upwards
off the oscillator
4
Carefully brush hair clippings out
of the blade blocks, the foils and
the housing.
Caution
The foils can be irreparably dam-
■
aged during cleaning. Only press
very gently.
5
Put all parts on again after clean-
ing.
Caution
To ensure smooth operation, the
■
foil frame must be properly seated
in the housing. Never take the foils
out of the frame.
Replacing the foil
frames and blade
blocks
You can replace the foil frame and
blade blocks. The appropriate
replacement shaving system (contain-
ing two blade blocks and one foil
frame) is article number MSR 58.
Ask your specialist dealer about it.
16 ENGLISH
F
for
H
.
Replacing the foil
frames
1
Remove the foil frame
so, push the side lock buttons
2
Fix the new foil frame in the hous-
ing.
Caution
Ensure that the foil frame is
■
firmly in position and cannot move
within the housing.
Replacing the blade
blocks
1
Remove the blade blocks
pulling them upwards off the oscil-
lator
H
.
2
Place the new blade blocks on the
oscillator.
Caution
Ensure that the blade blocks are
■
firmly in position on the holder.
Note
For an optimum shaving experi-
■
ence, always replace foil frames
and blade blocks at the same
time.
A
. To do
.
E
F
by
Publicidad
