Major Features; Removing The Lens; Using The Lens Hood Hb-45 1* (Fig. B) - Nikon AF-S DX NIKKOR 18-55mm f/3.5-5.6 VR Manual Del Usuario

Thank you for purchasing the AF-S DX NIKKOR 18-55mm f/3.5-5.6G VR. DX Nikkor lenses are specially designed for
use with Nikon digital-SLR (Nikon DX format) cameras, such as the D2-series and D40-series. When mounted on
Nikon DX-format cameras, the lens' picture angle is equivalent to approximately 1.5× the focal length in 35mm
format. Before using this lens, please read these instructions and refer to your camera's User's Manual.

Major features

• Enabling vibration reduction (VR) allows for shooting
at shutter speeds approximately three stops* slower
(at a focal length of 55mm) than when vibration
reduction is disabled, thus expanding the range of
effective shutter speed options, and simplifying
hand-held shooting at a variety of zoom positions.
Jp
(*Based on results achieved under Nikon
En
measurement conditions. The effects of vibration
De
reduction may vary by individual and/or shooting
conditions.)
Fr
• This lens employs a Silent Wave Motor to drive the
Es
focusing mechanism, making autofocusing smooth,
Se
silent and almost instantaneous. The A-M mode
switch 9 is provided for simple selection of
Ru
autofocus (A) or manual focus (M) operation.
Nl
• More accurate exposure control is possible because
It
subject distance information is transferred from the
lens to the camera body.
Ck
• The use of one aspherical lens elements ensures sharp
Ch
pictures virtually free of color fringing. Also, by utilizing
Kr
a seven-blade diaphragm that results in a nearly
circular aperture, out-of-focus objects in front of, or
behind, the subject are rendered as pleasing blurs.
14
Mounting the lens
1
Turn the camera off.
2
Remove the rear lens cap (Fig. D).
3
Keeping the mounting index 7 on the lens aligned
with the mounting mark on the camera body,
rotate the lens counterclockwise until it clicks into
place. Be sure that the mounting index 7 is on the
uppermost side.
4
Remove the front lens cap. (Fig. C)

Removing the lens

Be sure to turn the camera off before removing the lens.
Press and hold the lens-release button while turning
the lens clockwise to remove.

Using the lens hood HB-45 1* (Fig. B)

*Optional.
Attaching the hood
Hold down the lens hood attachment buttons 2
when attaching the lens hood 1. To store the lens
hood 1, attach it in the reverse position.
Removing the hood
Hold down the lens hood attachment buttons 2
when removing the lens hood 1.