Owner's Manual
1.6
Error Messages
The table below shows error message that the system may detect. If the display shows
an "ER" message, first unplug the unit and then plug it back in. This may re-set the
electronics, and if so, no further action is required. If the error message reappears, try
the solution shown under "Explanation." If this still does not fix the problem, Contact
your local authorized distributor.
ERROR
MESSAGE
ER 1, 2, 3, 5, 6
ER 4
ER 8
ER 9
DrizAir 1200 Owner's Manual
EXPLANATION
Problem with electronic control panel. Contact Dri-Eaz Service.
Check the temperature or sensor cable. Contact Dri-Eaz
Service for instructions.
Check the touchpad key. Press and release each key several
Check for obstructions or kinks in the drain hose.
times.
14
© 2023 Legend Brands, Inc.