Publicidad
Idiomas disponibles
Idiomas disponibles
The following table indicates the most common problems and their quick solutions. Consult this
table for any difficulty you may encounter.
PROBLEM
The light source
does not work
The light intensity
is incorrect
High temperature
at
the
light
source
Fuses blow
If the problem cannot be solved, please contact your local distributor or the closet ECLERIS office
and request technical service.
INMANUUML019 USER MANUAL - M. USO OM-200 V.2023.01 ENG-ESP US
9. TROUBLESHOOTING
PROBABLE CAUSE
The light source is off
The power cord is broken or cut
The plug is not in good conditions
The fuse is broken or burnt out
Arm at maximum height position
(Stand By)
The light intensity has not been set
correctly
The fans do not work
Obstruction of the ventilation grids
Excessive power consumption on
the auxiliary power output.
USER MANUAL / MANUAL DE USUARIO – MICROSTAR
Turn on the light source by
pressing the on/off switch
located on the Optical head
Change the power cord
Change the plug.
Change the fuse
Change the position to a lower
height
Adjust the light intensity by
pressing
increase/decrease button
Increase light intensity
Decrease light intensity
Notify the Technical service
Liberate
Ventilation grids
The power consumption of the
auxiliary power supply output
must not exceed what is
indicated on the label.
ACTION
the
or
clean
the
Page 31 of 64
Publicidad
