Publicidad
Idiomas disponibles
Idiomas disponibles
4. INSTALLATION AND OPERATION
4.1 BASE INSTALLATION
To assemble the microscope base, 4 wheels and 4 counterweights must be fitted.
The wheels are assembled by screwing the bolt into the ends of the base as indicated in the
following figure.
A wrench should be used to tighten the wheel bolts solidly to the base of the microscope.
The base has 4 removable weights that allow the easy handling of the microscope with a reduced
weight of the base.
Once the wheels have been mounted, the 4 removable weights must be placed.
Once the weights have been mounted, the plastic base cover must be placed on the base, as
indicated in the following figure:
INMANUUML019 USER MANUAL - M. USO OM-200 V.2023.01 ENG-ESP US
USER MANUAL / MANUAL DE USUARIO – MICROSTAR
Page 9 of 64
Publicidad
