Apply
After completing the [Ping Test] and [Save Location] check, click the [Apply] button to perform the following tasks.
1
Automatically create necessary folders under the specified folder in the [Save Location].
2
Load and save the factory Calibration results from the detector.
3
Load the detector settings.
Custom folder
Auto-create a serial number folder
(Created when completing Apply)
Condition: create a folder when there is no folder with the
same serial number in the specified folder
Creating a date-time folder
(Created when the [Calibration] button is clicked)
Log
Image
Factory Calibration
(Created when there is no folder or file upon the completion
of Apply or if the file is abnormally small in size)
[
]
[
]
[
]
[
]
EI result
(the applied date-time folder is created when an EI is
performed)
History file
Log file (connection logs, etc.)
Bright image
Dark image
User BPM image
Validation image
EI image
Raw image
[Avgdark.raw]
[Gain.raw]
[Offset.raw]
[BPM.raw]
17