Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
2. Turn the M VOL knob (12) to adjust the volume of the signal at the M INPUT (14).
EQUALIZER
This unit has a built-in audio pre-equalization system. Press the EQ button (26) on the remote control several times
and select one of the 6 audio equalizations available.
ECHO EFFECT (for MICROPHONE)
Turn the ECHO knob (11) to increase or decrease the echo effect on the input M INPUT (14).
DISCO-LIGHT EFFECTS
Press the LED POWER switch (18) in "ON" position to activate the Disco-Light effect on the speaker.
Press again the LED POWER switch (18) in "OFF" position to deactivate the Disco-Light effect.
RADIO MODE
1. Switch on the appliance and select the RADIO function (the frequency indication will appear on the display);
2. Press and hold key
search and automatic storage of stations (the radio automatically searches for radio stations and saves them
automatically). The number of stored stations depends on the radio signal in your area;
3. Once the scan is complete, use the keys
controlto move between the saved station
Note:
-
FM reception depends very much on where the device is located..
-
The proximity of TV sets, neon lamps or other household appliances can cause disturbances in the reception of radio
programs, in this case remove the appliance.
BLUETOOTH FUNCTION
1. Switch On the appliance and select the bluetooth function, the word "BLUE" appears on the display;
2. In Bluetooth mode the word "BLUE" on the display will flash and the system will automatically go into search
mode;
3. Activate the Bluetooth feature on the external device to be pair;
4. Initiate a search for devices. After select the "XF 1250 KB";
5. Enter the password "0000" if required;
6. Press the
(4) button on unit or the key (25) on remote control, to start playing and the buttons
9
(2) on
unit, or the keys
TWS FUNCTION OPERATION
True wireless stereo (TWS) technology
TWS technology enables user to make wireless connection between two speakers which are same model and com-
patible with TWS. In TWS connection, two speakers will be automatically grouped to be a Stereo- Speaker System
which outputs the left and right channel.
HOW TO ESTABLISH
Notice: Two speakers must be same model and both compatible with TWS.
1. Please switch On both speakers and enter "Bluetooth" mode;
2. Turn Off the Bluetooth function on your phone or other Bluetooth device;
3. Long press
/TWS (4) button of either speaker, the display will show " E-ON" and the " BLUE" will be flashing.A
different beep will then be heard to signify that the two speakers have connected via Bluetooth;
4. Open Bluetooth on the mobile phone and search "XF 1250 KB" and connect, a beep will then be heard signifying
that the mobile has connected to the speakers. You can now enjoy music from the two speakers.
TWS function operates in TWS mode, manipulations to the main speaker will be simultaneously effected in another
speaker. For example, volume adjustement, previous and next song selection, play and pause, power on and off.
Note:
-
If the 2 loudspeakers are not paired, switch off both devices and repeat steps 1, 2 and 3.
-
The TWS function only works between equal speakers or with other speakers that use the same micro processor or
solution.
(4) button on unit or the key (25) on remote control
:
:
(20) o
presets.
:
9
(32) and
(33) on remote control for selection of songs.
9
(2) on
unit, or the keys
13
XF 1250 KB
for a few seconds to activate the
:
9
(32) and
(33) on remote
:
(20) o
Publicidad
