Publicidad
Idiomas disponibles
Idiomas disponibles
8
8.8 Adjust the brakes with 30cm wheels (only for GO!)
8.9 Install/remove the 60cm wheels (only for START, START2)
Place the wheel into the central hole on the wheelchair frame
8.10 Adjust the brakes with 60cm wheels (only for START, START2)
•
When the 30 cm wheels are installed,
place the brake as
Note
so that it can make the right
pressure to securely lock the wheel
(FIG.9)
Images for illustrative purposes only
Only for quick release wheels (only for START2)
•
•
Only for wheels with fixed axle (only for START)
•
•
(FIG.10)
(FIG.11)
•
When the 60 cm wheels are installed,
place the brake on the milling. Lock the
device by tightening the Allen wrenches
(FIG.11)
Note
make the right pressure to securely lock the
caster
(FIG.9)
adjust the brake device
Remove the plastic cap and
push the wheel until it locks
into the place
(FIG.10)
Remove the wheels: push the button
on the centre of the wheel,
and extract the wheel
Place the big wheel and block it with the nut
Unscrew the nut and remove the big wheel
adjust the brake device so that it can
(FIG.10)
Publicidad
