CARLO GAVAZZI Guardian 2 Manual Del Usuario página 10

Set up the DIP-switches to match the door controller .
DIP-switch 1 - Sensor test input
DIP-switch 2 - Safety output
DIP-switch 3 - Motion output
DIP-switch 4 - Direction recognittion
Bi-directional
DIP-switch 5 and 6
10
DIP-Switch Settings
Uni-directional
Doors remains
closed with cross
- traffic
Not in accordance with DIN18650 (prEN16005)
In accordance with DIN18650 (prEN16005)
}
Not valid (red LED flashes and output
relays are in safe mode)
Test input Active Low
Test input Active High
Normally closed (NC)
Normally open (NO)
Normally closed (NC)
Normally open (NO)
Bi-directional mode
Uni-directional mode
Uni-directional
Opens only when
approaching the
door