Connect The Cordless Handset - Amplicomms BigTel 1200 Manual De Instrucciones

Connect the cordless handset

1. Open the battery compartment and insert the rechargeable
batteries. Observe the correct polarity.
2. Slide the battery compartment cover towards the centre of
the handset until it clicks into place.
For a full charge, the handset must be left in the base unit for at
least 16 hours (check the base unit's power supply!).
Important: Use only the batteries supplied with this product.
If the batteries need to be replaced later on the same battery
type must be used.
6
Helpline 0844 800 6503 (See page 25 for costs and hours of operation)