Kenmore POP-N-GO 23750 Manual De Uso Y Cuidado página 25

WARNING
Electrical Shock or Personal Injury
Hazard
Always turn off and unplug vacuum
cleaner before performing maintenance
to the vacuum cleaner. Failure to do
so could result in electrical shock or
personal injury from vacuum cleaner
suddenly starting.
TO CHECK THE BRUSHES
New Brushes
When brushes are worn to the level of the
base support bars, replace the brushroll
assembly.
BRUSHROLL SERVICING
Worn Brushes
Base Support
Bar
TO REPLACE BRUSHROLL
ASSEMBLY
1. Remove the floor brush from the
PowerMate
2. Remove PowerMate
brushroll assembly. See "To Remove Belt"
in BELT CHANGING AND BRUSHROLL
CLEANING (page 23).
3. Install new brushroll assembly.
4. Reinstall belt and PowerMate
"To replace belt" in BELT CHANGING
AND BRUSHROLL CLEANING (page 24).
- 25 -
®
.
®
cover, belt and
®
cover. See