Power swivel only
a Drive the lift up to the top stop/charge point.
b Keep up-direction toggle held on.
c The powered swivel will now swivel out
after a 2-3 second delay.
d Now move and hold the toggle to the
down direction.
e The seat will now rotate to the 'ride' position.
f Check the manual override switch works by
holding down, manually rotating the seat out
and then back to 'ride' position.
Power hinge track only
1 Using the handset:
a Drive the lift to the top of the stairs.
b Depress the down button and keep it
depressed.
c Observe the function of the lift.
The lift should:
i Drive down the stairs.
ii Stop at the park position.
iii Beep whilst lowering the hinge.
iv After a short pause continue to the
bottom of the track.
d Depress the up button and keep it
depressed.
e Observe the function of the lift.
The lift should:
i Drive up the stairs.
ii Stop at the park position.
iii Beep whilst raising the hinge.
iv After a short pause continue to the
top of the track.
2 Sit on the stairlift:
a Drive the lift to the top of the stairs.
b Push the toggle switch in the down direction
and hold it in that position.
c Observe the function of the lift.
The lift should:
i Drive down the stairs.
ii Stop at the park position.
iii Beep whilst lowering the hinge.
iv After a short pause continue to the
d Push the toggle switch in the up direction
and hold it in that position.
e Observe the function of the lift.
The lift should:
i Drive up the stairs.
ii Stop at the park position.
iii Beep whilst raising the hinge.
iv After a short pause continue to the
3 Turn off the power supply to the charge
contacts.
4 Repeat steps 1 and 2 above.
5 Turn the power supply back on.
HANDICARE 2000 SIMPLICITY / STYLE INSTALLATION MANUAL 41
bottom of the track.
top of the track.
Testing