Twister be cool Manual Del Usuario página 60

EN
Important ! It is not allowed to place objects under the
support leg. For information on the storage compart-
ments in the foot area please contact your vehicle
manufacturer.
Do not use the enhanced child seat facing forwards if
your child is under 76cm/15 months old.
Important ! The enhanced child seat should be only in
forward facing or rearward facing direction during
the travel.
2.3 Putting the child in/ Taking the child out
1. Adjust the rotation handle in the front of the base,
rotating the seat body 90° towards the vehicle door at
the same time.
2. Now you can put your child in or take him or her
out easily.
3. Secure your child in the seat.
4. Rotate the seat body 90° again so it is facing either
60
forwards or backwards, depending on the age of your
child, until it engages with a clicking sound.
Important ! Before every journey, make sure that the
rotating seat body is fully engaged.
2.4 Installation this enhanced child seat
Unfold and pull the support leg away from the bottom
of the enhanced child seat until it locks in place. Place
the enhanced child seat forwarder facing on a vehicle
seat. Install the enhanced child seat on the vehicle seat,
please refer to Section 1.6, Section 1.7, Section 1.8.
2.5 Securing your child in the enhanced child seat
Rearward Facing: Child height 40cm-105cm/ Child
weight ≤ 19 kg; Recline position: position 0
1. Press the strap adjustment button, while pulling out
the shoulder harnesses to the proper length.
2. Press the red button to disengage the buckle.
3. Fix the two metal sections of the buckle connector
on the both sides of the enhanced child seat.