Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Step 7: Insert diagonal belt and lab belt into the vehicle
buckle hear "click". Check the vehicle belt buckle is
correctly locked by pulling the seat belt upwards.
Step 8: Check that the diagonal belt and lap belt have
not become twisted and also check that the cover is
not impeding the movement in any way.
Main load point must be up car seat buckle. The
satisfactory position of the adult safety-belt buckle
relative to the child car seat is as photo. If in doubt
about this point, please contact us .
Make sure the seat belt has not become twisted. Also
check that the cover is not impeding the movement
or fit of the seat belt webbing in any way.
To disassemble your baby and the child seat, repeat
the above prescribed procedures in reverse order.
64
MAINTENANCE AND CLEANING
Daily maintenance
1. In daily use, check periodically the enhanced child seat.
The enhanced child seat should be replaced after an
accident.
2. Please keep this enhanced child seat in dry and
ventilated place to avoid damp moldy.
3. If the enhanced child seat becomes dusty, clean the
seat belt and the plastic pieces by swiping them with
a damp sponge and let it dry under ambiance.
4. If food or drink drop accidently on the buckle,
disassemble the seat belt from the enhanced child
seat and rinse it gently by warm water. Leave it dry
under ambiance.
5. For cleaning the entire child seat fabric cover,
please refer to the washing instruction.
Washing instruction:
Publicidad
