Twister be cool Manual Del Usuario página 61

4. Place the child into the enhanced child seat and
pass both arms through the harnesses. Position the
harness straps at or below the child's shoulders.
After the child is seated, re-check whether the shoul-
der harnesses are at the proper height.
Check and adjust the height of the shoulder straps
and headrest to the correct position according to your
child's height.
5. Engage the buckle and put the two metal sections
of the buckle connector together. Slot the two buckle
connectors into the slot in the buckle until they "click"
in place.
Check that the harness has not become twisted and
also check that the cover is not impeding the move-
ment or fit of the harness in any way.
6. Pull forward the adjustment strap and adjust it to
the proper length to make sure your child is snugly
secured.
7. Make sure the space between the child and the
shoulder harness is about the thickness of one hand.
Adjust the child seat to desire of recline position and
make your child comfortable.
8. Pull the rotation handle and turn the seat body
rearward facing ,at the same time, pull the recline
adjustment handle under the front seat body forward
to the largest recline position( position 0) . Release the
recline adjustment handle and push until you can
hear a "click". Now the child seat is locked in the
rearward facing position (position 5) .
Make sure the enhanced child seat is securely locked
in the desired position by pulling or pushing or pull on
the seat body.
Important ! Before making any car journey, ensure
that the rotating part of the enhanced child seat is
fully engaged by trying to rotate the enhanced child
seat in both directions.
EN
61