Publicidad
Idiomas disponibles
Idiomas disponibles
3) Deleting stored hand transmitters
4) Obstruction force adjustment
Decrease Force
Press and hold CODE button until a C is indicated on the
display.
All stored remotes will be deleted.
CAUTION: the obstruction force adjustment is set
automatically
during
adjustment is necessary.
a) Press and hold the SET button until 3 appears on the
display then release the button.
The unit is now in force adjustment mode.
b) Press the UP button to increase the force setting or the
DOWN button to decrease the force setting.
The minimum force is 1 and it can be adjusted upward.
c) Press SET to confirm your setting
NOTE: The force is set on 3 as standard in factory.
13
programming.
Normally
Keep Working
no
Publicidad
