Publicidad
Idiomas disponibles
Idiomas disponibles
1) 2-Parts Track:
As Figure 7 slide the A rail into the sleeve, slide the B rail into the sleeve.
3-Parts Track:
As Figure 8, slide the C rail into the sleeve, slide the D rail into the sleeve; slide the E rail into
the sleeve.
2) Cut the plastic thread; pull the screw rod along with inner chain to the end rail position
(Figure 9)
Figure 9
3) As Figure 10, release the nut & spring.
4) Tight the nut to the right position as shown in Figure 11, cut the plastic tape, cut the plastic
thread on sprocket, then whole rail assembled finished.
Figure 10
8
Keep Working
Publicidad
