Publicidad
Idiomas disponibles
Idiomas disponibles
Installation (Steel Track)
STEP 1 (Figure 4)
Attach the opener head to the steel track. Assembly the 2 "U" Hanging brackets with 6mm nuts
supplied.
STEP 2 (Figure 4)
Place the steel track and opener head assembly centrally on the garage floor, with the open
head furthest away from the door. Lift the front of the track up to the door bracket. Insert the
pivot pin and secure it with the split pin supplied.
STEP 3 (Figure 4, Figure 5)
Lift and support the opener head (with a ladder) so it is
positioned centrally and level. Fix the opener and track on
ceiling by Iron bracket A & B
WARNING
Do not allow children around the door, opener or supporting
ladder serious injury and/or damage may result from failure
to follow this warning.
Figure 4
6
Figure 5
Keep Working
Publicidad
