Franke NEPTUNE FHNE 604 3G TC Manual De Instalación Y Servicio página 8

EN
Important: These devices are „Y" type with respect
to the degree of protection against the dangers of
fire. The minimum distance from the edge appliance
is 150 mm for the side wall, 50 mm for the rear and
700 mm for any cabinets above it. The appliance is
recommended to be built into 40 mm thick worktops.
In case the dimensions are different, eventual
modifications have to be managed by the technician.
Note: if a hood is installed above the hob, for the
distance to be respected refer to the assembly
instructions of the hood.
MINIMUM DIMENSIONS (MM)
A = 590/750/790/1090/
(Diagonal COR TBC)
C = 400
If the appliance is not installed above
Z
an oven: arrange a separator baffle.
120
* 120 x 120 mm
FHNE 604 3G TC / FHNE 755 4G TC / FHNE 805 4G TC / FHNE 805 4G TC FM /
FHNE 1204 3G TC / FHNE 1204 3G TC FM / FHNE COR4 3G TC
B A B
B = 50
D = 700
120
20 mm
Max 50 mm
Installation procedure
The appliance is fixed to the unit by means of the
brackets and accessories provided.
Make sure that there is free access to the
Z
fixing elements in front and in the rear after the
installation of the appliance.
Prepare the hole in the worktop according to the
Z
dimensions indicated. Be sure to comply with the
dimensions indicated.
Yp
Xtop
Model
FHNE 604 3G TC
FHNE 755 4G TC
FHNE 805 4G TC
FHNE 805 4G TC FM
*Flush fitting around
top hole
FHNE 1204 3G TC
FHNE 1204 3G TC FM
*Flush fitting around
top hole
– 8 –
20 mm
Xp
Ytop
Htop
Xp Yp X Y
top top
590 510 560 480 40
750 510 560 480 40
790 510 770 490 50
790 510 770 490 50
792 512
1090 410 1070 390
1090 410 1070 390
1093 413
H
top
3
50
50
3