located on the upper grinding blade hold-
er and in the hole on the neck of the hop-
per.
• The manufacturer cannot be held responsi-
ble for bodily injury or damage to property
if these regulations are not complied with.
If the coffee grinder is to remain inac-
tive for a long period, clean it careful-
ly, dry the top container and leave it
open.
ATTENTION: Moving parts.
5
- USE
This appliance has been designed solely for
grinding coffee beans. Any other use is under-
stood to be improper, and consequently haz-
ardous. The manufacturer cannot be held
responsible for any damage as a result of
improper or incorrect use.
Do not use the appliance for grinding other
types of food, or anything else.
Do not use the doser (grinder-doser version) to
store foods or measure them.
THE COFFEE GRINDER-DOSERS MANUFAC-
TURED BY OUR COMPANY ARE INTENDED
FOR SKILLED PERSONNEL ONLY FOR PRO-
FESSIONAL USE AND NOT FOR HOUSE-
HOLD USE. The user must be an adult. Do not
allow children or incapable persons to use the
appliance.
6 - INSTALLATION
AND WIRING
The appliance must be installed by skilled
technical personnel in conformity with the safe-
ty rules in force. Incorrect installation may
result in injury of persons or animals, or dam-
age to property, for which the manufacturer
cannot be held responsible.
• The appliance must be placed on a stable,
flat surface.
• Before plugging in the appliance, make
sure the voltage and frequency values of
the supply mains correspond to the ratings
indicated on the label featuring the appli-
ance's technical data.
• The wall socket must be fitted with an effi-
cient earth contact. Consequently, it is
essential to make sure the earth system is
efficient and in conformity with current safe-
ty rules. If in any doubt, have the system
thoroughly checked by per-sonnel with the
appropriate professional skills.
• IT IS COMPULSORY TO EARTH THE APPLI-
ANCE.
• The manufacturer cannot be held responsi-
ble in the event this regulation is not com-
plied with.
• It is essential to make sure the ratings of the
system are suitable for the power absorbed
by the appliance - as indicated on the
label featuring the technical data - and that
the wall socket is protected against over
currents.
• Do not use extension cables, plug adapters
for multiple sockets or makeshift connec-
tions.
• The motor must rotate clockwise. If the rota-
tion of three-phase motors is to be inverted,
by inverting the two power supply wires
inside the plug, this must be carried out by
skilled personnel.
English
81