8.2
Coffe dose adjustment
(grinder-doser version)
In order to adjust the size of the portion dis-
pensed, the small knob located in the centre of
the ground coffee storage container must be
turned while holding still the star shaped dos-
ing unit. By turning the small knob anti-clock-
wise, the portion is reduced. Turning it clock-
wise results in an increase. In order to collect
the portions of ground coffee dispensed, insert
the coffee machine's filter holder all the way
onto the fork-shaped support under the ground
coffee outlet. In order to release a portion of
ground coffee, the doser lever must be pulled
all the way and allowed to return on its own.
Pull twice in a row for a double portion.
In manual coffee grinder-dosers and those with
time switches, in order to assure the portions
are regular, check every now and again to
make sure the amount of coffee ground to be
found in the doser is sufficient to cover the
feeding star unit.
8.3
Pressing
STATIC PRESSING DEVICE
Place the filter holder against the underside of
the pressing device and push upwards
SPRING PRESSING DEVICE
Place the compacting disk against the upper
face of the filter holder inserted in the fork-
shaped support and press down on the.
spring pressing device knob
9 - WARNINGS
REGARDING
OPERATION
• Do not leave the appliances turned ON
without coffee in the hopper.
• In the grinder-doser version, avoid pulling
the doserlever partially, always pull it all
the way.
• In the coffee grinder version it is essential
that nothing hinders the flow of ground cof-
fee from the outlet in any way in order to
prevent the risk of the appliance stopping.
Consequently, avoid using coffee bags
which are too small with respect to the
amount of coffee to be ground. At the end
of each grinding-cycle, shake the handle of
the pipe for a complete outlet of the coffee.
English
83