Sony XM-8ES Manual De Instrucciones página 7

Connector Panel (Front Panel)
 TURN-ON switch
Selects the turn-on mode of the amplifier.
• "REMOTE": Select this for remote turn-on
mode. The amplifier turns on when a turn-on
signal is received from the REMOTE terminal.
For details, see "REMOTE terminal" (page 10).
• "SIGNAL": Select this for high-level sensing
turn-on mode. The amplifier turns on when a
turn-on signal is received from the INPUT
connector. This feature is only available for
high-level (speaker level) input connection.
For details, see "REMOTE terminal" (page 10).
 INPUT/LINE OUT connector
Connector for the INPUT and LINE OUT
connection cable. For details, see "Input
Connection" (page 11) and "Output Connection"
(page 14).
 INPUT VOLTAGE switch
Selects the type of input connection.
• "LOW": Select this for low-level (line level)
input connection using RCA extension cables
(not supplied).
• "HIGH": Select this for high-level (speaker
level) input connection using a speaker-wire-
to-RCA adaptor (not supplied).
 SPEAKER OUT terminal
For details about the connection, see "System
Connection" (page 12).
 Fuse (40 A)
 +12 V terminal
REMOTE terminal
GROUND terminal
7
EN