Publicidad
Idiomas disponibles
Idiomas disponibles
6. USE OF THE ECO HOT WATER
Set the timer
In HEATING, ECO HEATING, and INTELLIGENT modes it is possible to set
the TIMER.
Setting of period 1 from 08:00 to 10:00 when you want the unit to
remain on.
To set the TIMER, press and hold the
time, the minutes and the icon ON 1 flash (-- : -- ON 1).
Pressing the
key, the hours and ON 1 lflash, set the desired hours
(08) with the
and
keys and confirm with
Set the minutes (00) that flash with the
with the
.
To cancel the changes during the setup phase, press the
Outlet water temperature
TEMP
Touch
confirm and then
touch
for esc set TIMER
key, after about 2 seconds, the
.
and
keys and confirm
key.
Current Hour
Touch
for 2 - 3 second
Blink
Touch
or
set minuts
Or
following the procedure used for TIMER ON 1
If, when setting the TIMER, it is not confirmed by pressing the
after about 5 seconds it returns to the main screen and the time entered
is acquired.
To set the TIMER OFF 1 (10:00), follow the same procedure as above.
If you want to also set the other timers that are available, ON 2 , OFF 2,
perform the same procedure used for the TIMER ON 1 and OFF 1.
To go directly from one TIMER to another, during the setup phase when the
hours and minutes flash at the same time, press the
scroll through the various timers:
ON 1
OFF 1
OFF 2
ON 2
Touch 1 time this symbol
Touch
or
set hour
Then touch
to confirm
TEMP
for confirm and set TIMER OFF 1
Blink
or
Blink
Blink
EN
EN
EN
EN
key,
keys to
53
Publicidad
