emmeti EQ 2021 Manual De Instalacion Y Uso página 55

6. USE OF THE ECO HOT WATER
Clearing the timer
In HEATING, ECO HEATING and INTELLIGENT modes and in OFF it is pos-
sible to cancel the TIMER already set.
Example cancellation TIMER ON 1.
Press and hold the key and after about 2 seconds, the HOURS flash:
SECONDS and ON 1.
Press the key once, only HOURS: and ON 1 flash, pressing the
key once.
If the procedure was performed correctly the TIMER has been deleted and
you will go back to the main screen.
Example cancellation TIMER ON 2.
Press and hold the key and after about 4 seconds, --: -- and ON 1
flash).
With the or keys, scroll through the various TIMERs:
ON 1
OFF 1
ON 2
OFF 2
Select the set timer ON 2
Press the key once, only HOURS: and ON 1 flash, press the
key once.
If the procedure was performed correctly the TIMER has been deleted
and you will go back to the main screen. If in the main screen ON 2does
not appear, the TIMER ON 2 has been cancelled.
If you want to cancel the timer setting, follow this procedure
TIMER ON 1 and TIMER ON 2 have been previously set.
Below is the information to cancel TIMER ON 1.
Outlet water temperature
TIMER ON 1 and 2 set
TEMP
TEMP
To cancel the TIMER ON 2 also follow the same procedure
used to cancel the TIMER ON 1
Touch
for 2 seconds
TIMER ON 2 set
Touch
it's possible annulare
TIMER ON 1
Hours, minutes and icons ON and 1 are flashing
TEMP
Premendo
icon ON, 1 and hour are flashing
TEMP
EN EN EN EN
55