Publicidad
Idiomas disponibles
Idiomas disponibles
12. Automated Learning Process./Activating Code.
CAUTION: The wall and/or handheld remote control can be programmed to multiple receivers or fans. If this is not
desired, turn wall switch off to any other programmable receiver or fan.
Restore electrical power and then, if using wall control, set slider switch on wall control to the ON position.
Within 60 seconds of turning on the wall control, press and hold the OFF button on the wall control for
5 seconds (or until light blinks twice or fan blades begin to turn).
Turn power off again for at least 5 seconds and then turn power back on. Within 60 seconds of restoring the
power, press and hold the OFF button on the front of the handheld remote control for 5 seconds (or until light
blinks twice or fan blades begin to turn).
Test the light and fan functions to confirm the learning process is complete--see Section 15 on the following page.
13. Remote/Wall Control Operation.
ON/OFF slider switch - turns wall control ON or OFF
HIGH button
- turns fan to HIGH speed
MED button
- turns fan to MEDIUM speed
LOW button
- turns fan to LOW speed
OFF button
- turns fan OFF
L1 button
- turns light kit ON/OFF when pressed
L2 button
- (not applicable for this fan)
REV button
- reverses blade direction
14. Smart Ceiling Fan Wi-Fi Control.
Without Wi-Fi activation, you will not enjoy the expanded features and functionality
of your ceiling fan: Breeze speed setting, Creating Schedules and Voice Activation.
To enjoy all the potential of your new device, refer
to the following steps to complete Smart setup.
1. Download the Bond Home App, available on
the Google Play Store and Apple App Store, or
use the QR code to download the app.
2. Open the Bond application.
3. If you already have a Bond account, simply log
in and continue to Step 4. If you do not have a
Bond account, press "Create Account" and
enter your name, email and create a password.
4. Select "+" to add a device.
5. Select "Smart By Bond" (SBB).
6. Select this smart ceiling fan.
7. Once the Bond application connects to the fan,
select "CONTINUE" to proceed.
["Smart Ceiling Fan Wi-Fi Control" continued
on next page.]
(switch not functional on handheld
remote)
once; dims light kit when pressed
and held down
(fan must be set on low before
reversing blade direction)
wall control
(Optional)
page 11
-
1 1
-
2 2
handheld
remote control
Publicidad
