Sime SimeConn Serie Manual página 41

2 TECHNICAL FEATURES
MAIN TECHNICAL FEATURES
During the design of the thermal plant, the
designer must ensure that heating and
water is evenly distributed to all floors in
every apartment, and in adequate amounts
to each thermal module.
A control valve with servo-control, relative
filter and all accessories to make the mod-
MAIN APPLICATION HYDRAULIC LAYOUT
ule function better are present inside the
thermal module, therefore the centralised
plant must be dimensioned bearing in mind
these installed appliances. It can also be bal-
anced by means of an appropriate limit
valve placed on the return circuit, only for
the two-way models. The SimeConn mod-
ules must be installed with adequate access
fro service and adjustment
Internal domestic
water distribution
The thermal module SimeConn is designed
to be used in utility plants with high temper-
ature terminals (radiators, fan convectors,
etc.) or in plants with radiant panels with
production of low temperature water
placed in thermal power station.
It is recommended that the system is
flushed and treated with a reputable inhib-
iter conforming to BS 7593.
Heating system
Fig. 1
IT
ES
UK
41