Publicidad
Idiomas disponibles
Idiomas disponibles
Infant Car Seat Mode
IMPORTANT:
Not all infant car seats are compatible with the
Brook/Brook + stroller. For infant car seat compatibility refer to
us.britax.com/support/frequently-asked-questions.
IMPORTANT:
Always secure child in car seat harness when infant
car seat is in use with the stroller.
IMPORTANT:
Use only with an infant car seat until child has
sufficient head and neck control.
Using a Compatible Britax Infant Car Seat
Attaching the Infant Car Seat
1.
Press both brake pedals down to
lock the parking brake.
NOTE: After setting the brake,
check that the brake is set
properly by attempting to roll the
stroller forward and backward. If
the stroller will not roll, the brake is
set properly.
2. Remove the toddler seat.
3. Align the car seat receivers with
the stroller adapters and push
onto the frame until a click is
heard.
NOTE: Seat attaches forward or
parent facing/rear-facing.
24
1
3
4. Pull up on both sides of the
infant car seat to ensure that it
is secure.
Removing the Infant Car Seat
1.
Pull and hold the release lever
on the back of the car seat and
lift up to remove from stroller.
4
1
25
Publicidad
