Publicidad
Idiomas disponibles
Idiomas disponibles
(EN) INSTRUCTIONS FOR USE
1. PLANNING AND INSTALLATION
Install Biolan Simplett Plus horizontally on a floor surface. When
selecting the location, consider the organisation of the ventila-
tion and liquid removal and leave enough space for use and main-
tenance. The device should be placed so that the ventilation pipe
is easy to bring outside. Leave enough room between the device
and the wall to make unloading of the device easier.
The device is delivered with the bulking material container turned
downward. Lift the container and lock the latches (Figure 1).
1.1 Technical specifications
• depth 680 mm
• width 530 mm
• seat height 465 mm
• height 1,020 mm
• weight 10 kg
• receptacle volume 28 litres
• outer diameter of the drain pipe 32 mm
• length of the drain pipe 335–935 mm
1.2 Year-round use of the dry toilet
When installed in a heated space, you can use the Simplett Plus
device all year round. In this case, ventilation and liquid removal
must be thermally insulated in cold sections, and the drain pipe
has to have a sufficient tilt to prevent liquid from freezing in the
pipe. If liquid is collected in a canister, it has to be emptied in au-
tumn to prevent the canister from breaking if it freezes. A dry
toilet installed in a non-heated space can be occasionally used
during winter. Simplett Plus is manufactured from cold-resistant
materials that will not get damaged in freezing temperatures.
Figure 1
Figure 2
EN
DE
FR
ES
SV
NO
DA
FI
PL
CS
ET
LV
LT
RU
5
Publicidad
