Lansinoh SMARTPUMP 2.0 Instrucciones De Uso página 14

4.2 Connecting the Breastmilk Expression Set
Once Breastmilk Expression Set is assembled, connect to pump base:
1. Secure one end of 600 mm
tubing to tubing Y connector.
4.3 Connecting for Single Pumping
1. Remove one of the 300 mm
tubing from the tubing Y
connector.
14
2. Secure other end of 600 mm
tubing firmly to the pump
connector.
3. Insert pump connector into
opening on left side of pump.
2. Secure plug into open outlet of
tubing Y connector.