Lansinoh SMARTPUMP 2.0 Instrucciones De Uso página 16

5.2 Getting Started
If possible, wait until your breastmilk
supply and breastfeeding are well
established. This is normally at least 3-4
weeks after birth, unless otherwise advised
by your healthcare provider.
1. Hold the breastmilk expression set to your
breasts so that the nipple is aligned to extend straight toward the nipple
tunnel of the breast flange.
2. Make sure the breast completely fills the breast flange so that a vacuum is
formed and no air escapes.
3. The breastmilk expression set and nipple tunnel should tilt slightly downward
to allow milk to flow naturally toward the bottle.
If you experience friction or discomfort on your nipples, you may need a
different size flange. Larger size flanges are available. For more details,
please call 800-292-4794
5.3 2-Phase Technology with Automatic Memory Function
Using Let-Down and Expression Phases
1. Press and hold the on/off button to turn the pump on. The Lansinoh® Smartpump
2.0 will always start in the let-down phase.
NOTE: When you turn the pump on for the very first time it starts in let-down phase, suction level 5.
2. After two minutes, the let-down phase will automatically change to the
expression phase.
NOTE: When you switch to the expression mode for the very first time the pump will start in
pumping style 2, suction level 3.
3. If you prefer to bypass the pre-set two minute let-down phase or your milk
lets down sooner than two minutes, press the let-down/expression toggle
button to move to the expression phase.
4. Automatic memory function will save the last pumping style and suction level
for each phase. However, the suction level will gradually build to the last used
setting for a more comfortable pumping experience.
The style mode indicator will appear in the display to signify that you are in the
expression phase.
16
www.Lansinoh.com
or visit