power tools.
reduce risk of electric shock.
refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
parts. Damaged or entangled cords increase the risk of
electric shock.
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
protected supply. Use of an RCD reduces the risk of
electric shock.
3. Personal safety
moment of inattention while operating power tools may
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
energising power tools that have the switch on invites
accidents.
A wrench or a key left attached to a
This enables better control of the power tool in
unexpected situations.
can be caught in moving parts.
(Original instructions)
connected and properly used. Use of dust collection
can reduce dust-related hazards.
tool safety principles. A careless action can cause
4. Power tool use and care
tool for your application.
the rate for which it was designed.
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Power tools are dangerous in the hands of untrained
users.
A
tool repaired before use. Many accidents are caused by
poorly maintained power tools.
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
5. Battery tool use and care
another battery pack.
ENGLISH
Properly
Slippery handles and grasping
A charger that is suitable for one type of
5