GE Profile P7CESAS6RBB Manual De Instrucciones página 19

Troubleshooting
Problem
Appliance does
not work/does not
turn on
No or delayed
response from
pressing buttons on
control panel
enough
Water/Steam does
not come out of
steam wand
not come out of
Espresso shot has
no crema
Appliance takes too
long to heat up
Water tank is empty
but "Add Water"
alert does not show
up
Cause
No power is connected to the appliance.
Panel may be dirty or wet.
Cup is not preheated.
Excessive scale has built up.
Empty system function may have been
used.
Something is blocking the steam wand.
Coffee grounds are too coarse.
Coffee beans are not fresh.
Excessive scale has built up.
Water sensor is detecting water on the
outside of the water tank.
Solution
Clean the panel with cloth provided and
ensure panel is dry.
brewing to warm up.
machine prior to use.
Descale the appliance as directed on
page 16.
Run the hot water function until water
starts dispensing.
Run the hot water function until water
starts dispensing.
Run the hot water function until water
starts dispensing.
Empty portafilter and try again with
a larger grind size or less force while
tamping.
Use a coarser grind size or less
dosage.
Adjust coffee bean grind size to a finer
setting during grinding operation or use
a double layer filter provided.
Change coffee beans.
Descale the appliance.
Wipe the water tank and back area of
the machine completely dry.
Avoid pouring water directly into the
water tank. It is recommended to pull
machine.
19