Motorola WPLN4137 Guia Del Usuario página 13

Chapter 2
Operating Instructions
The charger pockets accommodate either a radio with an attached Motorola Solutions-approved
battery, or a Motorola Solutions-approved battery alone. Batteries charge best at room temperature.
Prerequisites:
NOTE: To ensure optimized charging performance, turn off the radio while charging unless the
radio is transmitting data wirelessly on Wi-Fi or Bluetooth.
Procedure:
1 Plug the round end of the transformer cord into the socket (1) at the back of the charger.
2 Plug the transformer into the appropriate Alternating Current (AC) outlet.
A successful power-up sequence is indicated by a single green blink on the charger indicator.
Refer to the Charging Indicators on page
3 Insert a Motorola Solutions-approved battery, or a radio with a Motorola Solutions-approved
battery into the charger pocket.
a Align the battery contacts with the charger contacts.
b Press the battery into the pocket, ensuring complete contact.
Once the Motorola Solutions-approved battery is properly seated into the pocket, the charger
indicator illuminates, indicating the charger has recognized the presence of the battery.
4 To remove a radio or Motorola Solutions-approved battery from the charger, pull straight up until
the battery completely clears the charger housing.
2.1
Battery Locating Rail Adapter
The battery locating rail is a removable part which constitutes an adapter to accommodate standard
and slimline batteries. The charger is shipped with the battery locating rail in the standard battery
position.
When and where to use: Charging slimline battery.
Procedure:
1 Remove the battery locating rail by pinching inward both sides while pulling from the charger
pocket.
1
14.
MN009994A01-AA
Operating Instructions
13