Publicidad
Idiomas disponibles
Idiomas disponibles
Technical specifications
Levelling laser
Type number
Laser type
Laser class
Power output
Power supply
Estimated battery life
Operating temperature
Storage temperature
Self-leveling range
Leveling time
Accuracy
Weight
Tools elements
A
On/off switch
B
Green led light
C
Projection mode button
D
Laser light opening
E
Battery department cover
F
Warning label
G
Knob
H
Rod
I
Knob
J
Adapter
K
Handle
L
Level
M
Knob
N
Knob
* Not all of the accessories illustrated or described are
included as standard delivery.
Intended use
This tool is intended for the defining and checking of exact
horizontal, vertical and crossed lines by projecting self-
leveling laser beams.
For Your Safety
Read all instructions. Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury.
Pay special attention to the safety
instructions and warnings; failure to follow these may
result in serious (eye) injury.
Additionally, the general safety instructions either in the
enclosed booklet or those added in the centre of these
operating instructions must be observed.
SAVE THESE INSTRUCTIONS.
Do not look into the laser beam (laser
radiation).
Do not point the laser beam at persons or
animals.
Do not place the tool in a position that may
cause anyone to look into the laser beam
intentionally or unintentionally.
Do not use any magnifying optical tools (such as
magnifying glasses, telescopes, or binoculars) to view the
laser beam.
Do not remove or damage the warning label on the tool.
Do not operate the tool in the presence of flammable
liquids, gases or dust.
Do not operate the tool with children around.
This tool should not be used by people under the age of 16
years.
515
F 012 051 5..
[nm]
650
2
[mW]
< 1
3 x AA (LR6) / 1,5V battery
30 of continuous run with alkaline batteries
[°C]
-10 à 55
[°C]
-20 à 60
≤ ± 5
[°]
[s]
5
± 5
[mm/m]
[kg]
0,46
Do not use the tool for any purpose other than those
mentioned in this instruction manual.
Only use the original accessories which are intended for
this tool.
Always switch off the tool when not in use.
Have repairs carried out only by a SKIL After-Sales
Service. Never open the unit yourself.
SKIL is able to ensure flawless functioning of the unit only if
the original accessories intended for it are used.
Before Using
Carefully read this instruction manual as well as the warning
label on the tool, before you use the tool (figure 1).
The warning label F (included) must be substituted
according to the user's language. For exemplo, to the
country that speaks portuguese, the warning label
corresponding to the letter "P" must be used.
ON/OFF (figure 2)
Switch on/off the tool on by pushing switch
downwards/upwards.
Do not look into the laser beam.
Do not point the laser beam at persons or
animals.
Always switch off the tool after use.
MOUNTING OF BATTERIES (figure 3)
Ensure that the tool is switched off.
Remove cover B by turning it counter-clockwise insert 2 x
AA / 1,5V batteries (pay attention to correct polarisation).
Mount cover B by turning it clockwise.
Always remove the batteries from the tool, if the tool is not
used for a long period.
Always replace the complete set of batteries.
Operating the tool (figure 3)
Position the tool on a horizontal surface.
Switch on the tool.
If the surface inclines more than ± 5º, an acoustic
warning signal indicates that the tool is out of its self-
leveling range.
before projecting a line shake the tool somewhat in
order to activate the self-leveling system and wait for 5
seconds.
Project a horizontal line by pressing button C for the first
time.
Project a vertical line by pressing button C for the second
time.
Project a crossed line by pressing button C for the third
time.
For using the tool manually project a crossed line by
pressing button C for the fourth time (the acoustic warning
Publicidad
