HumanTechnik Lisa Instrucciones De Servicio página 10

towards the top of the battery com-
partment, to the required channel
number.
All transmitters and receivers must be
set to the same channel.
Fig. setting the correct radio channel.
3. Installing the alarm accessories
Plug the alarm accessories into the
socket on the underside of the RF
alarm transmitter.
This socket is identified by a triangle
framing an exclamation mark:
Please note:
A separate socket must be used for
the water alarm sensor.
This socket is marked with a double
wave.
English 10
Available accessories:
Alarm mat (A-2921-0)
Connect the plug from the alarm
mat directly into the socket in the RF
alarm transmitter (alarm accessories
socket). Place the alarm mat under
the doormat.
Alarm call button (A-2935-0)
Connect the alarm call button's plug
directly into the socket of the RF alarm
transmitter (alarm accessories so-
cket). The alert is triggered by pres-
sing the button (e.g. from the patient's
bed).
Water alarm sensor (A-2924-0)
Plug the water alarm sensor into the
socket marked with a double wave.
The water alarm sensor is suitable for
nearly all liquids.
Stick the sensor with the supplied
double-sided adhesive tape to the
wall so that the contacts touch the
floor. The signal is triggered as soon
as both contacts are in contact with
the liquid.
Mount-on contact (A-2922-0)
For indicating opened doors and win-
dows. The mount-on contact consists
of a permanent magnet and a reed
contact. The contact is open when the
magnet is in contact. An alarm signal
is triggered if the magnet is separa-
ted from the contact. Use the cable to
connect the mount-on contact to the