Intervention
Inspect the tightness of the
screws and nuts
Check the engine oil level
Change the engine oil
Verificar
Check the hydraulic oil level
Check air filter cleaning
Replace air filter
Clean air filter
Clean the carburetor purge valve
Clean and adjust the spark plug
Clean tank and fuel filter
Check the idle speed
Check/adjust valve gap
Check impeller gap
Check fuel circuit
Check combustion chamber
(1) Perform frequent maintenance works when the equipment is used in dusty areas.
(2) These items should be serviced by the service dealer unless you have the appropriate tools and mechanical knowledge.
1st month or
Every 3 months
20 hours
Every 2 years (replace if necessary) (2)
Every 6 months or
or 50 hours
100 hours
(1)
After 500 hours (2)
Every year or
300 hours
(2)
(2)
(2)