Publicidad
Idiomas disponibles
Idiomas disponibles
Description of the device
Illustration A
Battery mount
1
Battery terminals
2
Identification of charging voltage
3
(18V / 36V / 18V & 36V)
Indicator lamp
4
Wall attachment
5
Type plate
6
Mains cable socket
7
Operation
Charging process
Note
The operating state of the battery pack
can be read off the battery pack dis-
play.
The display symbols are described in
the battery pack operating instructions.
If the display does not show anything
during charging, the battery capacity is
fully depleted or very low. Display
shows remaining charging time once
the battery pack is sufficiently charged.
1. Plug the mains cable in the mains
cable socket.
Illustration B
2. Plug the mains plug into the socket.
3. Push the battery pack into the
mounting on the charger.
Illustration C
The charging process begins auto-
matically.
Indicator light flashes green.
The battery pack display shows the
remaining charging time. The dis-
play shows 100% and the indicator
lamp lights up green continuously
when the battery pack is fully
charged.
4. Remove the battery pack from the
charger after charging.
5. Pull the mains plug out of the socket.
6
Note
The charged battery pack can remain
in the charger until it is used. There is
no danger of overcharging.
Avoid unnecessary energy consump-
tion and unplug the charger when the
battery pack is fully charged.
Wall attachment
The device is suitable for wall attach-
ment. Information on the weight of the
device is provided in the "Technical da-
ta" chapter.
1. Check the load capacity of the wall
before installation.
2. Keep the mains plug freely accessi-
ble. Hole distance = 66 mm.
Transport and storage
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device
during transport and storage.
Care and service
The device is maintenance-free.
Regularly check the battery termi-
nals for soiling.
Clean dirty battery terminals.
Check the ventilation slits for soiling,
clean if necessary.
Occasionally recharge battery
packs stored for a longer period.
Troubleshooting guide
Malfunctions often have simple causes
that you can remedy yourself using the
following overview. When in doubt, or
in the case of malfunctions not men-
tioned here, please contact your au-
thorised Customer Service.
English
Publicidad
