Publicidad
Idiomas disponibles
Idiomas disponibles
24
scooter returns to normal speed when the temperature returns to safe levels, it is advisable to
wait five minutes before restarting the scooter, to allow complete cooling of all components.
15. TRANSPORT
Your scooter is designed to be transported easily in a car. Consult chapter 12.2 on the scooter
disassembly methods and chapter 12.1 on the scooter assembly methods.
15.1 Transporting the scooter
• Disassemble or fold the seat and the handlebar as far as possible in the loading area of the
vehicle used for transport;
• The choice to disassemble or lower the seat and the handlebar depends on the size and
shape of the trunk of the vehicle used for transport;
• Do not lift the scooter using the plastic parts of the body or the handlebar. Breakage of these
parts is not covered by the warranty;
• Do not lift the rear compartment using the tyres or the wheels. The compartment could
rotate and cause injury or damage;
• IT IS advisable to use removable sheets or other types of covering to protect the scooter
during transport.
WARNING!
• If the scooter and its components are not correctly and safely stored, they could
move or be carried by the air and cause injury or damage;
• Do not sit on the scooter during transport. When transporting the scooter, ensure
it is firmly secured with an approved anchoring/attachment system.
16. CLEANING
16.1 Cleaning the tyres
Clean the tyres with normal kitchen detergents and a damp cloth. Do not use solvents on the
tyres. Solvents could damage or soften the tyre material.
16.2 Cleaning the body
• Clean the scooter body with a damp cloth. Do not wash the scooter with a hose. Dry with a
soft and clean cloth;
• Use cold water mixed with a specific soap to remove dirt;
• Clean by hand with a soft cloth.
16.3 Cleaning the seat
Clean with a delicate soap or detergent and a damp cloth. A detergent for vinyl can also be used.
17. GENERAL MAINTENANCE INSTRUCTIONS
The scooter requires periodic maintenance. Incorrect maintenance of the scooter could lead
to a higher number of technical problems, make it less flexible and invalidate the terms of
the warranty. Preventive maintenance is important. The main operations to perform are listed
below.
INSPECTION
Brake functioning
Tyre conditions
DAILY
MONTHLY
X
X
EVERY SIX
ANNUAL
MONTHS
PERFORMED
BY
User
User
Publicidad
