KSIX URBAN PLUS Manual De Usuario página 2

How to attach the strap
Although only one strap is included in the box, the
straps of the
interchangeable.
The shorter strap should be placed in the slot at the top
of the display and the longer strap should be placed in
the slot at the bottom of the display, otherwise the
insertion system may be irreparably damaged.
1. To remove a strap: hold the strap, press the button on
the back of the watch on the corresponding strap
piece and slide it to the left.
2. To insert a strap, hold the strap and then slide it to the
right until the strap is fully inserted into the watch
body.
The straps have small metal pieces at the ends that
must be inserted into the watch body rail.
Charging
Charge the product for more than two hours before
use. Align and adjust the product in the charging port
until the charging power indicator appears on the
wristband display.
Use the special charging cable that comes with the
package to charge. Make sure the charging port is dry
before you start charging.
To charge the device, connect the charging cable to the
power adapter or USB port of your computer or other
suitable device.
Do not use the power adapter with an output higher
than 5V 1A to charge, otherwise it may burn the circuit
and thus damage the charging system.
Switching on and off
The easiest way to turn the smartwatch on and off is to
press and hold the button for two seconds.
Slide your finger down and then to the left and select
the "On/Off" icon in the smartwatch quick menu
options.
Press the green button to turn it off immediately. Press
the red button to continue using the smartwatch.
You can also turn it off or keep it on from the "Settings"
section of the main menu.
smartwatch Urban Plus are