Publicidad
Idiomas disponibles
Idiomas disponibles
lnstallation
2. Connect tahe exhaust duct to the Air outlet connector on back of the unit. Slide-in the
adaptor A downwards until it is locked in place. (Fig. C)
Install the Window Slider Kit
1. Cut the foam seal (adhesive type) to the proper length and attach it to the window sash.
2. Attach the window slider kit to the window sash. Adjust the length of the Window Slider
Kit: Loose the screw A to adjust the length of the Window Slider Kit, then tight the screw when
the length is suitable.
Note: the length of the Window Slider Kit is 67.5 cm to 120 cm.
or
Air outlet connector
Adaptor A
Fig. C
Horizontal
Foam Seal A
Window sash
Screw A
Window
slider
47
Vertical
kit
Publicidad
