Publicidad
Idiomas disponibles
Idiomas disponibles
Engine parts will become hot when the engine is running. To prevent
severe burns, avoid contact with hot engine parts.
When an engine is running, it produces carbon monoxide, a toxic and
poisonous gas. Operate the vehicle ONLY in a well-ventilated area.
Wear safety eye protection that meets ANSI standards.
Cautions
Please ensure that the vehicle battery is fully charged and the scanner
is firmly connected to the vehicle DLC to avoid erroneous data
generated by the scanner and diagnostic systems.
Please do not use the code reader during driving.
Keep clothing, hair, hands, tools, test equipment, etc. away from all
moving or hot engine parts.
Keep the scanner dry, clean, free from oil/water, or grease. Use a mild
detergent on a clean cloth to clean the outside of the scan tool, when
necessary.
Keep the scanner out of the reach of children.
FAQ
Q: Why does TOPDON ArtiDiag600 S have no responses when it is
connected to a car?
A: Check if the connection with the vehicle diagnostic socket is solid, or
check if the ignition switch is on, or if the tool supports the car.
Q: Why does the system stop when reading the data stream?
A: It may be caused by a slackened connector. Please turn off the
scanner, firmly connect the connector, and switch it on again.
Q: Communication error with vehicle ECU?
A: Please confirm the following cases:
• Whether diagnostic connector is correctly connected.
• Whether ignition switch is ON.
Or, send your vehicle's year, make, model and VIN number to us using
Feedback feature for timely technical assistance.
Q: Why does the screen flash when the engine ignition starts?
A: It is normal and caused by electromagnetic interference.
22
Publicidad
