CONTROL PANEL
Please note that, while the button
the button
speed, please press the button
In case the push-button panel starts flashing even if the hood is turned off, this is due to the routine maintenance notify.
Please proceed in washing the metal grease filters and replacing the carbon filters (filtering/recycling hood version only)
as shown at page 19. Conclude the procedure by resetting the push-button panel: simply hold down the
until all the panel lights turn off.
Timer button: once activated, the timer will cause the cooker hood to
work for additional 10 minutes before turning off automatically.
After pushing the TIMER but¬ton, the light of the clock button will start
flashing, indicating that the timer function is now enabled. It is possible
to turn the timer off anytime by pressing the button again. This will
bring the hood back to the preceding behaviour.
Turns the hood on at the minimum speed and reduces the blower spe-
ed in case it is working at a different speed;
Increases blower speed (from minimum to speed 2 and speed 3);
Brings the blower at the boost speed for 10-15 minutes (thereafter it will automa-
tically reverse to speed 3). Pressing the button for approx. 7 seconds will result
in the activation/deactivation of the daily air filtration programme (the blower
will work continuously for 24 hours, being idle for 20 minutes after working for 5
minutes at the minimum speed);
Turns the light on and off.
. is used solely to increase the speed up to the 3rd. In order to bring the blower at the boost
.
allows the user to decrease the speed from boost to the OFF status,
16
button