coralwai WAKE Manual De Instrucciones página 24

INSTALLATION
BASIC TOOLS FOR INSTALLATION
• Hammer drill (1)
• M6 and M22 drill bits
• Needle-nose pliers (1)
• Pair of scissors or pipe cutters
• Tape roll (1)
• Screwdriver (1)
BASIC INSTALLATION SKILLS
Generally, it is recommended to install the osmosis unit in the kitchen. It can be
placed in a cupboard, leaning against the wall... as long as the piping is not obstructed.
When installing, close the water inlet valve, remove the hose connecting the original
tap and the water tap, connect the water from the tap to the water inlet marked on
the purifier. Finish by connecting the water outlet marked on the osmosis unit.
The tap and purified water only need to connect the valve or tap to the drain of
the osmosis unit. During the installation process, the part connected to the outside
should be wrapped with raw adhesive tape in a clockwise direction and be tightened
to ensure that the water purifier does not leak.
EN
ACCESSORIES REQUIRED FOR INSTALLATION
• PE hose
• 2-way purified water tap and tap hanger
• Inlet ball valve
• Drain collar screws
• Tap angle valve (if necessary)
24