Publicidad
Idiomas disponibles
Idiomas disponibles
7
7B
7A
7 SECURING FAUCET
Align Faucet (7A) to sink surface. From underneath sink, secure Faucet using
Wingnuts (7B). Hand tighten.
8
8 WATER SUPPLY CONNECTIONS
Connect water Supply Lines (8A) to Faucet Inlets (8B). (Supply lines and
fi ttings are not included). Please follow manufacture's instructions when installing
suppy lines.
ENGLISH
7A
7B
7B
8B
8A
9
9C
9 POP-UP ROD CONNECTION
Insert Lift Rod (9A) into hole at the back of Spout (9B). Gently, slide Lift Rod
(9A) down the hole in Spout Hub (9B).
If the Lift Rod (9A) can not be inserted into the hole in Spout Hub (9B), then
loosen Spout Nut (9C) and align as needed. Retighten Spout Nut (9C).
POP-UP DRAIN BODY INSTALLATION STEPS
10
10L
10F
10J
10G
10H
10B
10 POP-UP PREPARATION
Remove Flange (10A) and unscrew Nut (10C) from the Pop-Up Drain Body
(10B). Retain the Packing Ring (10D) inside the Ball Rod Opening (10E). Take
off the Spring Clip (10F) from the Ball Rod (10G). Place the Nut (10C) over
the Ball Rod (10G). Remove Locknut (10H), Friction Washer (10J), Rubber
Washer (10K), and Stopper (10L) from Flange (10A).
3
9A
9B
10A
10G
10K
10C
10E
10C
10D
Publicidad
