Descargar Imprimir esta página

Skil PWRCORE 20 RS5884-00 Manual Del Propietário página 16

Sierra alternativa de 20 v sin escobillas

Publicidad

Idiomas disponibles

Idiomas disponibles

Pivoting the Shoe (Fig. 10)
The shoe pivots to provide maximum control
when it is aligned against the surface being
cut.
a. Depress the lock-off button to the locked
position and then remove the battery pack
from the tool.
b. Firmly hold the saw and then pivot the shoe
to the desired angle, while taking care to
avoid contact with the blade.
c. Reinstall the battery and prepare to cut.
General Cutting (Fig. 11)
WARNING
metals. Failure to do so could result in serious
personal injury.
WARNING
tool, always check to determine that the
switch performs properly and returns to the
"OFF" position when released.
WARNING
insulated grip area to help prevent electrical
shock. When sawing into walls or floors
you may encounter electrical wiring.
Sawing into a "live" wire will conduct
electricity into the tool.
a. Depress the lock-off button to the locked position and then remove the battery pack from
the tool.
b. Make sure that the workpiece is firmly clamped in place to keep it from slipping or moving
while cutting.
c. Intall the appropriate type and size of blade for the workpiece material and size.
d. Adjust the pivot shoe as necessary to make sure that the blade will extend beyond the shoe
and through the workpiece at all times.
e. Adjust the pivot shoe as necessary to expose unworn blade teeth for longer blade life.
f. Check for clearance behind the workpiece so that the blade will not contact another surface.
g. Mark the line of cut clearly. If cutting metal, apply cutting oil to the line.
h. Attach the battery pack to the reciprocating saw.
i. Hold the saw firmly with both hands. Make sure to keep your hands on the insulated
gripping areas only.
j. Depress the lock-off button to the unlock position and squeeze the variable-speed trigger
switch to start the saw and bring it to the maximum desired cutting speed before applying
the blade to the workpiece.
16
Never use the wood-
cutting blade for cutting
Before attaching the
battery pack onto the
Hold the tool only by the
plastic handle and the
Fig. 10
Pivot Shoe
Fig. 11

Publicidad

loading